Product Listing By Type


Thermal Dispersion Level Switches
A thermal Dispersion Switch Consists of Two Ratiometrically Matched Temperature Sensors. The Types of Sensors Used are Either Temperature Sensors, which are Used on teh Standard Units, or Platinum RTD (Resistance Temperature Detectors) Sensors, which are Used for High Temperature Applications. The Sensors are Spaced a Short Distance Apart from Each Other. The Two Sensors are Picked to Track Each Other with Temperature. These Sensors have a Resistance that is Proportional to their Temperature and are Known for their Accuracy Over a Wide Temperature Range.
Recommended Products (5)

TX Series Thermal Dispersion Flow / Level / Temperature Switch (Standard Response)

Model TX
K-TEK's Standard Flow/Level/Temperature Switches are the Most Durable Instruments Available. They are Ideally Suited for Detecting the Increase or Decrease in Flow or Level of Virtually all Liquids, Gases and Slurries. The "No Moving Parts" Principle Offers Extremely Reliable and Repeatable Operation with no Vanes or Linkage to Stick and No Paddles to Break Off. This Series of Low Switches Offers a Simple, Reliable and Cost Effective Operation in the Most Severe Industrial Applications.
More...

TQ Series Thermal Dispersion Flow / Level / Temperature Switch (Fast Response)

Model TQ
The TQ Series of Fast Response Flow/Level/Temperature Switches are Used when the Response Time in Detecting the Increase or Decrease of Flow or Level is Critical. With no Moving Parts Exposed to the Process, these Switches Provide Extremely Reliable and Repeatable Operation in Virtually all Liquids, Gases and Slurries. The TQ Series has a Wide Selection of Threaded and Flanged Process Connections with Customer Selectable Probe Lengths. The Varied Electronic Circuit Board Offers the User a Wide Selection of Power Inputs Ad Relay Outputs.
More...

TS Series Thermal Dispersion Flow/Level/Temperature Switch (Sanitary)

Model TS
The TS Series flow/level/temperature switch is designed to provide reliable detection in the food, pharmaceutical and bio-tech industries. These highly polished instruments, featuring quick disconnect fittings, can be used to detect the increase or decrease of flow, level or temperature in virtually all liquids, gases and slurries.
More...

IX Series Thermal Dispersion Flow / Temperature Switch (In-Line Unit)

Model IX
The IX Series, In-Line Switch, is Ideally Suited for Applications, such as Chemical Injections, Cooling Lines, Sampling Lines, Lubrication and Other Smaller Flow Rate Situations.
More...

IM Series Thermal Dispersion Flow / Temperature Switch (In-Line Unit)

Model IM
The IM Series is a General Purpose Low Cost In-Line Flow/Temperature Switch. The IM Series Switch is also Suited for Applications, such as Chemical Injections, Cooling Lines, Sampling Lines, Lubrication and Other Smaller Flow Rate Situations.
More...

2009 KTEK Corporation Contact Webmaster | Privacy Statement | Terms Of Use