Specialty Level Instruments

A Seal Pot is Used to Supply Barrier Fluid to Double or Tandem Seals. These Seal Types are Used on Pumps Moving Chemicals that the EPA Lists as Volatile Organic Compounds (VOC's). The Seal Fluid Level is Monitored to Determine Seal Performance. If the Fluid Level in the Pot Changes, the Seal has Failed. Environmental Safety is Enhanced, since the Seal Fluid Leaks into the Process or the Process Leaks into the Seal Fluid (Depending on How the Seal is Set Up) Instead of Leaking into the Environment.

Recommended Products (5)

KM50 Tank Car Gaging Device Model KM50 The KM50, for Top of Car Mounting, is a Magnetically-Coupled, Liquid Level Indicating Device that Provides and Isolated Means of Determining the Fluid Level within a Storage Tank without Exposing Personnel to Potentially Harmful Contact. More... ST95 Seal Fluid Supply Tank Model ST95 The ST95 is a High Quality Seal Fluid Supply Tank with Integral Magnetic Level Indication that is Used to Replace Conventional "Seal Pots" that use Glass Gauges to View the Seal Fluid Level. Since the Level Indicated by the ST95 is More Visible than with a Conventional Gauge Glass, it is Easier to Monitor Seal Performance. The ST95 was Developed to Decrease Installation Costs for Customers that were Sourcing the Pots without Gauge Glasses from Seal Manufacturers and Adding gauge to the Pots Themselves. The ST95 Makes a More Compact and Less Expensive Installation under these Circumstances. More... AccuTrak AT500MD Drilling Mud Pit Level Transmitter Model AT500MD The AT500MD is based upon the magnetostrictive principle. The AT500MD is a Drilling Mud Pit Transmitter for Direct Insertion. More... AT200 Valve Positioner Model AT200VP The AT200 Valve Positioner is a compact, high accuracy valve position transmitter that uses K-TEK’s patented Magnetostrictive sensing technology. In the valve positioning application, the transmitter is bolted to the yoke of the actuator with two (2) mounting brackets that are supplied with the transmitter. A third bracket is secured to the stem connector. This bracket holds the magnet that provides the signal to the transmitter. More... Chute Master Model Chute Master The Chute Master works on the non-contact principle of microwave energy. This microwave emits an average power density of less than 0.05mW/cm2. Therefore, there is no need for any warning signs, shielding or protection and it is regarded as totally safe. More...